Skip to main content

The ULTIMATE police tank!

Hh guys! Legomaster here!I just made a brand-new creation! The ultimate police tank!

It looks familiar,doesn't it?If you are thinking this,you are correct!I took apart the ninja sub to make this.It has 4 treads and 3 guns.

The top part lifts away to reveal a super copter! And the back opens to show a hidden motorcycle!If you liked it,please comment!Thanks!


Popular posts from this blog

Ember Mech

I know I have been gone for a while, but I am back, with a whole new slew of creations to reveal! 
Here is Ember, the fire tribes attack mech. It is capable of catching up twice its weight in a standing position, is about 28 studs tall, and has fully posable arms, elbows, hip, shoulders, fingers, and ankles. 

Here is the opened interior with the mech deactivated. 

These are the pieces used to combine into the Ember mech; two hand and forearm pieces that are connected, two shoulders, cockpit, waist, two leg pieces, and two feet. 

Here is the back. Not as cool, but crucial to the design!

Here is a side view of the mech with its arm.

Here are two examples of ways you can pose the mech:
Defensive maneuver.

Here is my favorite: Donkey Kong smash!

This is Kyle, the pilot.

Fun fact: This whole mech was inspired by a piece I found that I thought would make a cool shoulder piece on a mech. Comes to show one piece can create something amazing.
Well, thats it for now. If you have any ideas for …

Excalibur, the mini mech part 1.

Hello again! Welcome to another exiting post from Legomaster! In this post I will be showing you how to build an amazing MOC(my own creation), Excalibur, the medieval mini mech! This is a part one of a two part post. The first post (this one) will show you how to build the top torso.
Here is the mech itself, Excalibur!

Here are the pieces to start off with.

Start by taking one 1x2 double stud brick and attach a 1x2 bar plate piece on each side as shown.

On top of each 1x2 bar plate, attach a 1x1 circular clip plate as shown.

On the back of the 1x1 circular clip bar attach a inverted 1x2 slope to the back as shown. 

On the front of the 1x1 circular clip plate and part of the front of the inverted 1x2 slope, attach a 1x2 brick with side studs. That is the brick you started with in the beginning.

On the inner bottom sides of both of the 1x2 brick with side studs, attach a 1x1 plate side clip as shown.

Do the same thing on the outer bottom side, except with light grey. You can however, d…

Excalibur, the mini mech part 2!

Welcome to Excalibur, the mini mech part 2! In this post I will be showing you how to build the legs for the mini mech. To see how to build the torso, here is a link: 
Lets get started!

First gather the following pieces.

Start off by putting a 1x2 tile on top of a 1x2 tile with a side bar.

On top of that add a 1x2 cheese slope or 2 1x1 cheese slopes.

As those will be the feet, put them to the side. Next grab 2 headlight bricks. In each hole attach a little minifigure ray gun. They are preferable because of the unique angle they offer.

On opposite sides of each other, apply a 1x1 plate to the side of the ray gun. After that attach a 1x1 plate with a clip to the top of each headlight brick.

On the back we will now attach a 1x1 round plate to the square on the back of the headlight brick.

Now attach the feet as shown.

Now we build the part that connects the legs and torso. Get a minifigure neck attachment back pla…